Dissing Chrono

1

Dissing Chrono is one of the first series designed by Dissing. The design is trendy and fashionable which is mixed with more classic chronograph watch features. The watch is equipped with a punctual stopwatch and sapphire crystal glass.


How the watch works

The crown of the watch has two settings.

The first setting, namely the first notch in which the crown can be pulled out (1), sets the date on the watch. To set the date, pull out the crown in the first notch, then rotate the crown clockwise to the correct date and push the crown in to set the selected date.

The time is set in the second notch (2), where the crown is fully extended. When the crown is fully extended, the time is set and then the crown is pushed all the way into the watch case again to start the watch (0).

The three chronographs in the watch (C, D, E) function as a stopwatch with millisecond, second and minute counters, respectively. These are controlled by the top button on the side of the watch (A), where they are turned on and stopped. The lower button is used to reset the chronographs (B).

A chronograph clockwork must be calibrated from time to time to reset the chronograph indicators. In addition, the watches from the Chrono series are equipped with a tachymeter in the ring around the dial. This can be used, among other things, to measure speed.



Watch specifications and functions

  • Watch diameter: 44 mm
  • Thickness: 15 mm
  • Band width: 22 mm
  • Water resistance: 5 ATM / 50 meters
  • Lock type: Fold lock
  • Bezel: Tachymeter
  • Lumen: Luminova
  • Glass: Sapphire crystal
  • Stopwatch: Yes
  • Date display: Yes